Slide PALLET RECYCLING SYSTEMS

Bandsaw Dismantler

A high quality Bandsaw Pallet Dismantler is the cornerstone of your pallet recycling business. We manufacture these premium quality, versatile Bandsaw Pallet Dismantlers to handle your most punishing pallet recycling requirements. The 64” x 72” floating tabletop assures you can cut even the widest skids. Quick reconfiguration allows for one or two operator pallet recycling with an adjustable blade cutting height.

Bandsaw Dismantler Features:

  • 64″ x 72″ floating table-top
  • Adjustable blade cutting height
  • Table can be quickly repositioned for one or two operator use
  • Patented curve fence promotes twist-through
  • Unique twist saw cutting design for maximum safety
  • Heavy duty tube steel construction
  • Pneumatic blade tensioner with gauge
  • Removable arch
  • 3,600 rpm blade speed, with other speeds available on request
  • Baldor motor, starter, enclosure, and control box
  • Several electric or gasoline power source options

Durability and ease of use are hallmarks of SMETCO equipment. Each SMETCO Bandsaw Dismantler comes with a full 1 year warranty, features our patented ‘Curve Fence’ for unparalleled ease of use and consistently cuts through recycled lumber with fasteners such as:

  • Nails
  • Banding
  • Wire
  • Bolts
  • Screws

Over ten inches of adjustable blade cutting height provides maximum versatility, cutting applications such as:

  • Pallets
  • Boxes
  • Crates
  • Skids
  • Spools

Stringer Notcher

Notch your 4-way pallet stringers using a SMETCO Pallet Notcher. These pallet notchers are designed to notch new or recycled stringers for 4-way pallets. They feature the extra-tough Profile Technology Nail Buster™ cutting heads.

Increase your production by notching two 2 x 4’s at once. The True-Cut Notcher will notch one 2×4, two 2×4’s, or a 4×4 in a single pass. The True-Cut Notcher produces a flat bottom notch for your pallet stringers.

  • Notches 2 x 4’s or 4 x 4
  • Green wood tips or nail cutting
  • Standard 1 1/2″ notch with radius corners
  • Standard 9 inch notch length
  • 9 inch indexable head
  • Adjustable notch placements from 6 inch to 26 inch
  • Stringer sizes: 36 to 84 inches
  • Heavy duty tubular construction
  • 15 HP 3 phase 220V (standard)
  • Rolling Bed
  • Adjustable End Stops
  • Fully guarded for safety
  • Notches 12+ Stringers per minute

Trim Saw

Use a SMETCO Single End Trim Saw, Double End Trim Saw or Triple Trim Saw to cut your new or used pallet lumber. All SMETCO Trim Saws are designed for new or recycled lumber for maximum versatility in your pallet production operation.

Available in a variety of configurations to fit your budget and production capacity requirements:

  • Single End Trim Saw
  • Standard Bed Double End Trim Saw
  • Wide Bed Double End Trim Saw
  • Triple Trim Saw

The SMETCO Single End Trim Saw is our most economical trim saw. Like all of our equipment, this machine will withstand years of punishing use.

  • 5 HP 3 phase or 5 HP single phase motor
  • 1/2 HP gear reduction chain drive
  • 3 conveying chains
  • 12 inch blade
  • Adjustable from 18″ to 60″

The SMETCO Standard Bed Double End Trim Saw cuts both ends of your pallet boards simultaneously for quick, accurate and safe pallet production. Our standard model is built to handle up to 63″ board lengths using two 5 HP motors with 12″ blades.

  • Cuts both board ends at once
  • 25 – 30 boards per minute
  • 32″ to 63″ board lengths
  • Heavy duty design
  • Two 5 HP motors
  • Two 12 inch blades
  • 1/2 HP conveyor drive
  • Manual or automatic feed options

The SMETCO Wide Bed Double End Trim Saw is built to handle up to 96 inch board lengths using two 7 1/2 HP motors with 16 inch blades. This brute is built for maximum versatility and durability for your toughest applications.

  • Cuts both board ends at once
  • 25 – 30 boards per minute
  • 18″ to 96″ board lengths
  • Ultra heavy duty design
  • Two 7 1/2 HP motors
  • Two 16 inch blades
  • 1/2 HP conveyor drive
  • Optional variable speed chain drive
  • Optional power adjustment

The SMETCO Triple Trim Saw produces three simultaneous cuts on each board for maximum production volumes. This high volume saw is built for maximum durability in the toughest conditions.

  • Makes three cuts at once
  • 50 – 60 boards per minute
  • 34″ to 53″ board lengths on either side, independently adjustable
  • Ultra heavy duty design
  • Three 7 1/2 HP motors
  • Three 16 inch blades
  • 3/4 HP conveyor drive
  • Power adjustment

Faster, safer, more profitable pallet recycling equipment from SMETCO – Quality you can depend on every time.

Pallet Lumber Turntable

Sort your sawn pallet lumber using a SMETCO Pallet Lumber Turntable. Turntables efficiently and economically collect your gang sawn pallet lumber for quick grading and stacking.

Pallet Lumber Turntable Features:

  • 8′, 10′, 12′ or 16′ diameter turntables available
  • Gear reduction
  • Table rotates on four urethane casters
  • RPM custom configurable to your application
  • 32″ tabletop height
  • Automatic and manual controls
  • Single or three phase power
Menu